Arcam FMJ-A29 Stereo Integrated Amplifier

Arcam’s A29 integrated amplifier represents another major step forward for Arcam’s stereo audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.


Product Description

Drawing on the many years of amplifier design experience at Arcam, the A29 uses the best quality components and
engineering practice to produce a product that will give many years of musical pleasure and reliable service.
With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor
output stages and exceptionally low levels of distortion and noise the A29 is capable of reproducing music with all its
original authority and detail. Rest assured you will be hearing the music just as the artist intended.

The A29 have been designed to leapfrog the competition with a massive 80 watts per channel into 8 ohms and 175 watts into
4 ohms, allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient.
During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with
total control and finesse.

There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right
to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifiers for music
lovers who understand that power is nothing without control.


Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz: 80W
Single channel, 4Ω, at 1kHz: 175W
Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
Phono (MM) cartridge:
Input sensitivity at 1kHz: 5mV
Input impedance: 47kΩ + 100pF
Frequency response (ref. RIAA curve): 20Hz – 20kHz ± 1dB
Signal/Noise ratio (Awtd) 50W, ref. 5mV input: 80dB
Overload margin, ref. 5mV at 1kHz: 23dB
Nominal sensitivity: 1V
Input impedance: 10kΩ
Maximum input: 4.6Vrms
Frequency response: 20Hz – 20kHz ± 0.2dB
Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
Preamplifier output
Nominal output level: 735mV
Output impedance: 230Ω
Headphone output
Maximum output level into 600Ω: 5V
Output impedance: 1Ω
Load range: 16Ω – 2kΩ
Accessory power output
2.1mm DC connector: 6V, 500mA
Mains voltage: 110-120V or 220-240V
Power consumption (maximum): 500W
Dimensions W x D x H (including feet): 433 x 275 x 85mm
Weight (net): 9.2kg
Weight (packed): 10.7kg
Supplied accessories: Mains lead
CR902 remote control
2 x AAA batteries
Accessory power cable


There are no reviews yet.

Be the first to review “Arcam FMJ-A29 Stereo Integrated Amplifier”