Three meters across the front panel provide a window into the operation of the amplifier and give the amplifier a striking façade. The selection of premium parts internally is reflected in the beautiful metalwork of the chassis and exquisite finishes. The circuit is design features the new KT150 power output tubes for 150 watts of effortless power delivery. A reflection of the past yet clearly a guiding light into the future of music reproduction, the GS150 is poised to deliver years of musical enjoyment.
155 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic distortion typically 0.6% at 155 watts, below 0.03% at 1 watt.Approximate actual power available at ‘clipping’ 160 watts (1kHz). (Note that actual power output is dependent upon both line voltage and ‘condition’ i. e.: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.)
(-3dB points) 5Hz to 80kHz.
(-3dB points at 1 watt) 0.5Hz to 120 kHz.
2.0V RMS BAL for rated output. (24 dB Bal gain into 8 ohms.)
300K ohms Balanced.
Non-inverting. Balanced input pin 2+ (IEC-268).
8 ohms, 4 ohms.
OVERALL NEGATIVE FEEDBACK
HUM & NOISE
Less than 0.1mV RMS – 114dB below rated output (IHF weighted, input shorted).
Rotary selector for tube bias, Power on/off, fan speed, auto shut-off on/defeat, RS232, 12V trigger
POWER SUPPLY ENERGY STORAGE
Approximately 1040 joules.
105-125VAC 60Hz (210-250VAC 50Hz) 730 watts at rated output, 900 watts maximum, 420 watts idle.
4 – Matched pair KT150 – Power Output; 4 – 6H30 Driver.
19″ (48.3 cm) W x 9 3/8″ (23.8 cm) H x 22 3/4″ (57.8 cm) D.