With the introduction of the new 10X5 High Output moving coil there is no doubt Dynavector will retain this enviable position and again set the standard for high output moving coil cartridges.
The 10X5 now features Dynavector’s unique magnetic flux damping and softened magnetism (patent) along with powerful Neodymium magnet that combine to eliminate any hardness or irritating edginess that commonly occurs in many moving coil cartridges.
Dynavector are also renowned for the capability of winding the finest coil assemblies. This has enabled them to minutely increase the coil wire diameter of the 10X5 to achieve a reduction of impedance to 150 ohms whilst retaining a healthy 2.5mV output. This also ensures both a rugged and reliable circuitry.
The 10X5 also features a newly designed Aluminium head block with M2.5 thread to provide a rigid platform for the cartridge motor and secure fixing to the tonearm.
Type: High output moving coil cartridge with flux damper and softened magnetism
Output Voltage: 2.5mV (at 1KHz, 5cm/sec.)
Channel Separation: 25 dB (at 1KHz)
Channel balance: 1.0 dB (at 1KHz)
Frequency response: 20 – 20,000Hz (± 2dB)
Compliance: 12 x 10-6 cm/dyn
Tracking force: 1.8 – 2.2 grams
DC resistance: R=150 ohms
Recommended load impedance: >1K ohms
Cantilever: 6mm length aluminium pipe
Weight: 7.3 grams