Naim DAC Digital to Analogue Convertor

Capable of partnering and upgrading a wide range of Naim Audio products, the DAC has more in common with our CD players than with any conventional DAC. Its Burr-Brown converter chips, for instance, are also found in our flagship CD555 CD player. The DAC overcomes the jitter inherent in standard digital connections by reading data independent of its timing signal. Its digital filtering, based on a 40bit floating-point SHARC DSP chip running unique Naim Audio code, sets new standards in its class.

If the DAC’s music performance is extreme, its flexibility is just as remarkable. With eight S/PDIF and two USB inputs, it’s adaptable to any system configuration and can grow to meet any need.


SKU: naim dac Category:

Product Description

The Naim Audio DAC is the end result of several years of research. It introduced several original digital music technologies that have since gone on to help inform the development of an entire range of streaming products.

The DAC overcomes the jitter issues of S/PDIF by reading the music into a “rotating” data RAM buffer independently of its timing signal and reading it out again clocked by one of ten extremely low noise, fixed frequency crystal sine-wave oscillators. The data entering the downstream digital filtering and DAC chips is then completely isolated from the incoming S/PDIF jitter. The Naim Audio DAC also suppresses RF noise from S/PDIF through electrical isolation of its DSP front end from the digital to analogue converter and analogue circuits. Each element is also run from separate power supplies.

The Naim Audio DAC’s digital filtering is handled by a powerful SHARC DSP chip running unique Naim Audio authored code to create an ultra-high precision 40-bit floating point filter. The filter over-samples by 16 times on 44.1kHz data and provides stop-band attenuation of 180dB on all data. Following the digital filter are the two mono Burr-Brown digital to analogue converter chips, as used in the CD555 CD player. Finally the Naim Audio DAC features a very high performance, low noise, and low distortion fully discrete analogue output stage.


Audio Inputs
8 x S/PDIF:
– 2 x coaxial BNC
– 2 x coaxial phono
– 4 x optical TOSLINK
Front and rear panel – the front overrides the rear. Type-A
Audio Outputs
Output Impedance
Line Output
2.2V RMS
Load Impedance
10kΩ (min.)
Frequency Response
10Hz – 20kHz, +0.1/-0.5dB
Remote Control
Infra Red (RC5)
Remote Input
1 x 3.5mm jack on rear (RC5)
Remote Output
1 x rear panel 3.5mm jack (RC5)
Sample Rates Supported
32kHz -192kHz, 24bit
32kHz – 768kHz, 24bit
iPod, iPhone
48kHz (max.)
User Control Front Panel
Front panel buttons
IR Input
Front and rear panel
IR Output
Real panel socket
Power Supply Voltage
100V, 115V, 230V; 50 or 60Hz
Power Consumption
<30VA (max. inc iPod charging)
Physical Dimensions (HxWxD)
70 x 432 x 301 mm
5.6 kg
Supplied with
Standard Interconnect


There are no reviews yet.

Be the first to review “Naim DAC Digital to Analogue Convertor”