Sonus Faber Olympica III Floor Standing Speakers

Contact store for details.

$16,495.00$17,495.00

Clear
SKU: N/A Categories: ,

Product Description

Few speakers are able to combine such a brilliant balance of technical innovation and quintessential style.

The Olympica III has a 29mm dome Tweeter containing Damped Apex Dome (DAD), derived from the development of Aida – one of Sonus faber’s leading systems.

It has a totally Sonus faber designed 150mm ultra dynamic linearity midwoofer. CCAW wire is used on a composite former “eddy current free” voice coil. The dynamically linear magnetic field motor incorporates triple Kellog/Goeller rings. A special custome diaphragm is made with a real time air dried non pressed blend of traditional sellulose pulp, kapok, kenaf and other natural fibers, developed according to the most natural sound. To further inhibit any residual cone coloration we are using a transparent viscous surface damping coating. Special coaxial anti-compressors is used, designed to remove cavity resonance and distortions.

There is a non-resonant “progressive slope” design, optimized amplitude/phase response for optimal space/time performance. “Paracross topology” on both tweeter hi-pass and midwoofer low pass, cross-over points 250 hz – 2.500 Hz.

SPECIFICATIONS

CABINET
Enhanced “Lyre shape” design, progressive thickness triple curvature cabinet walls damped spread resonance spectrum system. Solid walnut vertical clamps.

TWEETER 

Sonus faber “Arrow Point” DAD (Damped Apex Dome, synthesis of the classic dome and ring transducer) 29XTR2. A Sonus faber designed 29 mm moving coil driver. The ultra dynamic linearity is given by the new Neodymium motor system.
MIDRANGE
Sonus faber M15XTR. A totally Sonus faber designed 150 mm ultra dynamic linearity midwoofer. CCAW wire is used on a composite former “eddy current free” voice coil.
WOOFERS
Sonus faber wooferS W18XTR  are direct descendants of the 9” speakers used in “Aida”.
FREQUENCY RESPONSE
35 Hz – 30.000 Hz, tuning port included.
SENSITIVITY
90 dB SPL (2.83 V/1m). NOMINAL
IMPEDANCE
4 ohm.
SUGGESTED AMPLIFIER POWER OUTPUT
50W – 300W, without clipping.
LONG-TERM MAXIMUM INPUT VOLTAGE (IEC-268-5)
22V rms.
FINISH
Natural walnut or graphite multicoated with medium gloss ecologically sensitive lacquer.
DIMENSIONS
1114x403x508mm
WEIGHT
88 kg Net, 91 kg Gross

Additional information

Reviews

There are no reviews yet.

Be the first to review “Sonus Faber Olympica III Floor Standing Speakers”