Description
LUXMAN C-900U SPECIFICATIONS
Input sensitivity/Input impedance Unbalanced 255mV/43kΩ
Balanced 255mV/86kΩ
Output/Input impedance Unbalanced rating 1V/90Ω, max. 11V
Balanced rating 1V/180Ω, max. 22.5V
Frequency response 20Hz to 20kHz (+0, -0.1dB)
5Hz to 120kHz (+0, -3.0dB)
Total harmonic distortion Unbalanced 0.009% (20Hz to 20kHz)
Balanced 0.005% (20Hz to 20kHz)
S/N ratio (IHF-A) Unbalanced 123dB
Balanced 126dB
Volume adjustment New LECUA1000
Negative feedback circuit ODNF 4.0
Max. tone control range BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Remote control functions ・Operation・Dimmer・ Input selector
・Output mode・Balanced phase selection
・Channel preset・External pre-amplifier input
・Line straight・Loudness・Volume up/down
・Mute・Zoom
Power consumption 42W
2.2W (in standby mode)
External dimensions 440(W) x 130(H) x 430(D) mm
(including 17mm front panel knob and 14 mm rear panel speaker terminals)
Net weight 19.7kg
Accessories Remote control (RA-20)
Power cable
LUXMAN M-900U SPECIFICATIONS
Rated output
Instantaneous max. output: 1,200W + 1,200W (1Ω)/at stereo 2,400W (2Ω)/at monaural
Input sensitivity: 1.24V/150W (8Ω) GAIN 29.0dB
Input impedance: Unbalanced 51 kΩ Balanced 34 kΩ
Frequency response: 20Hz to 20kHz (+0, –0.1dB) 1Hz to 130kHz (+0, –3.0 dB)
Total harmonic distortion rate: 0.008% or less (1kHz/8Ω) 0.1% or less (20Hz to 20kHz/8Ω)
S/N ratio (IHF-A): 117dB
Amplification circuit: ODNF 4.0
Output configuration: Bipolar 4-parallel push-pull x 2
Power transformer: EI type 1,250VA
Damping factor: 710
Power consumption: 540W 280W (under no signal) 1.0W (at standby)
External dimensions: 440(W) x 224(H) x 485(D) mm front side knob of 2mm and rear side terminal of 38 mm included in depth
Net weight: 48.0kg
Accessories: Dedicated remote cable Power cable
Speaker terminal Supported Y-lug terminal dimension: Width of part a: 14mm or less Width of part b: 7mm or more
* Connection may not be performed depending
on the shape of the Y-lug terminal.
Reviews
There are no reviews yet.