Description
The final version of the beloved SL-1200G/1210G series* has been transformed into a Master Edition, incorporating a decade of Technics’ expertise.
This limited version represents the pinnacle of the SL-1200 series, featuring a special gold design and available worldwide in Silver: 1,200 units / Black: 1,210 units—each a standout in the SL-1200 legacy.
*This model is the final version of the SL-1200G. Other SL-1200 models, including the SL-1200/1210GR2 and SL-1200/1210MK7, will continue to be produced.
Gold Logo & Serial Number Plate
Features a gold-painted embossed logo and a serial number plate indicating this limited edition model.
Gold Tonearm
Equipped with a magnesium tonearm finished in gold paint.
Coreless Direct Drive Motor Achieving Stable Rotation
The SL-1200GME/1210GME features a coreless direct-drive motor that eliminates cogging for smooth rotation. Its twin-rotor construction maintains high torque while reducing bearing load and minute vibrations. The coil mounting base uses the same reinforcement pattern as the Reference Class SL-1000R/SP-10R for enhanced rigidity.
Upgraded ΔΣ-Drive (Delta Sigma Drive)
Unlock a realm of audio precision with the ΔΣ-Drive – a state-of-the-art system harnessing Technics’ expertise in PWM signal processing. The SL-1200GME/1210GME expands the PWM carrier frequency from around 2 kHz to over 20 kHz, reducing audible noise and further suppressing micro-vibrations.
Three-layered Turntable Platter
The turntable has a three-layered construction with a rigidly combined brass and aluminium die-cast platter. With a deadening rubber covering its entire rear surface to eliminate unnecessary resonance, thereby achieving high rigidity and vibration damping. This delivers smooth rotational stability and inertial mass surpassing the SP-10MK2, the direct-drive turntable standard used by broadcast stations worldwide, as well as having more than twice the inertial mass of the SL-1200MK5.
High-level Balance Adjustment
When the weight distribution of the turntable is uneven, excess vibration or noise occurs during rotation, which causes degradation in sound quality. Therefore, the balance of the turntable is adjusted at the factory by using specialized high-precision balance adjustment equipment for each and every item after the turntable is assembled. Turntables that have undergone adjustment are labelled with a sticker reading “BALANCED” to indicate that adjustment has been done.
Four-layered Cabinet Construction
A hairline-processed, 10-mm-thick top panel of immaculate aluminium has been added to the previous three-layered construction of aluminium die-cast, BMC, and heavyweight-class rubber on the SL-1200MK5. This four-layered construction combines high rigidity with a high-quality finish and feel.
Insulator
A newly developed zinc insulator using αGEL™ gelatinous material with excellent shock absorption, providing high vibration damping and minimizing feedback.
Tonearm
The tonearm uses lightweight magnesium with cold drawing for high precision. High initial-motion sensitivity is achieved through Technics’ gimbal suspension construction and high-precision bearings.
SPECIFICATIONS
TURNTABLE SECTION
Drive Method
Direct Drive
Motor
Brushless DC motor
Turntable Speeds
33-1/3, 45 and 78* rpm
* The turntable speed will be 78.26 rpm when set to 78 rpm.
Starting Torque
0.32 N・m (3.3kgf・cm)
Build-up Characteristics
0.7s from standstill to 33- 1/3 rpm
Braking system
Electronic brake
Wow and Flutter
0.025% W.R.M.S.
Turntable Platter
Brass and aluminium die-cast combined
Diameter：332mm
Weight：Approx. 3.6kg (Including a rubber sheet)
TONEARM SECTION
Type
Static Balance
Effective Length
230mm
Overhang
15mm
Tracking Error Angle
Within 2° 32′ (at the outer groove of 30cm(12″) record)
Within 0° 32′ (at the inner groove of 30cm(12″) record)
Offset Angle
22°
Arm Height Adjustment Range
0 – 6mm
Stylus Pressure Adjustment Range
0 – 4g (Direct Reading)
Headshell weight
Approx. 7.6g
Applicable Cartridge Weight Range
(without auxiliary weight)
5.6 – 12.0g
14.3 – 20.7g (including head shell)
(with small auxiliary weight)
10.0 – 16.4g
18.7 – 25.1g (including head shell)
(with big auxiliary weight)
14.3 – 19.8g
23.0 – 28.5g (including head shell)
Cartridge Mounting Dimension
12.7 mm (1/2″) interval
Head Shell Terminal Lug
1.2mmφ 4-pin terminal lug
TERMINALS
Audio Output
PHONO (Pin Jack) x 1
EARTH TERMINAL x 1
GENERAL
Power Supply
AC220-240 V, 50/60 Hz
Power Consumption
11W (ON)
0.3 W (OFF)
Dimensions (W x H x D)
453 x 173 x 372 mm
Weight
Approx. 18.0kg
Operating temperature range
0℃ to +40℃
Operating humidity range
35% to 80% RH (no condensation)
Accessories
Turntable, Turntable sheet, Dust cover,
EP record adaptor, Balance weight,
Auxiliary weight, Head shell, Overhang gauge,
Screw set for cartridge, Cartridge spacer,PHONO cable,
PHONO earth lead, AC power supply cord, Screw set for turntable
Owner’s Manual
Reviews
There are no reviews yet.