Description
FEATURES OF XX-2A PHONO CARTRIDGE
Alnico magnet and Flux Damping
Incorporating Alnico magnets with low magnetic resistance into the magnetic circuit, the XX-2A phono cartridge ensures minimal fluctuation in magnetic force during record playback. Compared to mainstream high-energy rare-earth magnets, such as samarium cobalt and neodymium boron, Alnico magnets contribute to a high signal-to-noise ratio (S/N) and excellent transient response. Additionally, patented Flux Damping technology stabilises magnetic flux within the air gap, ensuring consistent performance akin to higher-tier models.
High Rigidity Magnetic Circuit
Crafted with stainless bolts securing the front and rear yokes along with the magnets, the XX-2A phono cartridge boasts a high-rigidity magnetic circuit. Skilled artisans meticulously adjust tightening torque during assembly, a process crucial for maintaining sound quality and ensuring optimal performance for each unit.
Low-Output MC Cartridge
With an output voltage of 0.28mV, the XX-2A conforms to the general level for MC cartridges, making it compatible with various amplifiers and transformers including the SUP-200. With a recommended load impedance of more than 30 ohms that ensures suitability for different load settings, including 47k ohms (phono stage input).
Compliance
Featuring a compliance of 10mm/N and weighing 8.9g, the XX-2A phono cartridge is compatible with a wide range of tonearms, from light to medium mass. We recommend the use of a light weight headshell to optimise performance.
⇒ … learn more about Phono Cartridge and Tonearm Matching
Solid Boron Cantilever
The XX-2A phono cartridge is equipped with a 6mm length solid boron cantilever, coupled with a PathFinder (PF) line contact stylus, creating a lightweight and rigid vibration system for enhanced playback accuracy.
SPECIFICATIONS
Type
low output moving coil cartridge
with flux damper and alnico magnet
Output Voltage
0.28 mV (at 1KHz, 5cm/sec.)
Channel Separation
30 dB (at 1KHz)
Channel balance
1.0 dB (at 1KHz)
Frequency response
20 – 20,000 Hz（±1dB）
Compliance
10 mm/N
Tracking force
1.8 – 2.2 g
Impedance
6 ohms
Recommended load impedance
> 30 ohms
Cantilever
6mm length solid boron
Stylus tip
PF Line contact shape,
stylus radius: 7 x 30 micron
Weight
8.9 g
Reviews
There are no reviews yet.