Description
The new C22 Mk V is the latest McIntosh vacuum tube preamplifier to carry the cherished C22 model number. It has all the performance of the acclaimed C70 but with the hallowed C22 moniker and its signature glass and aluminum front panel design.
The C22 Mk V uses one 12AT7 and five 12AX7A vacuum tubes which can be seen through a glass panel located on the top of the preamp. Knobs and rocker switches operate all control functions while modern LED lights indicate input selection and volume level. The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.
Bypassable bass and treble tone controls are located on the front panel and can be adjusted in 2dB increments via rotary knobs. Impedance and capacitance for the phono inputs can also be adjusted via separate rotary knobs. In addition to setting the listening level, the volume knob can also be used to adjust the relative volume balance between the left and right audio channels. The ¼” headphone jack is powered by our High Drive headphone amplifier and features our Headphone Crossfeed Director (HXD®) technology. HXD improves the sound localization for headphone listening by restoring the directionality component of the sound stage that’s normally only heard from loudspeakers.
Our Power Control technology is included with four ports that can automatically turn other connected McIntosh components such as amplifiers, CD players or turntables, on and off. Data ports are also present and can control basic functions of connected McIntosh source components via the included remote control.
The C22 Mk V sits atop a stunning polished stainless steel chassis and features the timeless McIntosh illuminated logo, control knobs, and aluminum end caps. With its retro black glass and aluminum front panel design, the C22 Mk V will fit right in with McIntosh home audio systems of any era – from the 1950s to current day. Contact your local dealer to learn more.
SPECIFICATIONS
ELECTRONIC SPECIFICATIONS
Number of Channels
2
Total Harmonic Distortion
0.08%
Frequency Response
+0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 15Hz to 100kHz
Maximum Volts Out (Balanced / Unbalanced)
16V RMS / 8V RMS
Sensitivity High Level (Balanced / Unbalanced)
900mV / 450mV
Sensitivity Phono (Moving Coil)
0.45mV
Sensitivity Phono (Moving Magnet)
4.5mV
Signal To Noise Ratio (High Level)
100dB
Signal To Noise Ratio (Moving Coil)
75dB
Signal To Noise Ratio (Moving Magnet)
75dB
Voltage Gain (High Level)
15dB
Voltage Gain (Moving Coil)
60dB
Voltage Gain (Moving Magnet)
40dB
Input Impedance (Balanced / Unbalanced)
44K ohm, 22K ohm
CONNECTIVITY
Balanced Input
2
Unbalanced Input
3
Phono Input Moving Coil
1 (adjustable)
Phono Input Moving Magnet
1 (adjustable)
Upgradeable Digital Audio Module
No
Digital Coaxial Input
0
Digital Optical Input
0
Digital MCT Input
0
Digital USB Input
0
HDMI (ARC) Input
0
Digital AES/EBU Input
0
Balanced Fixed Output
0
Balanced Variable Output
2
Unbalanced Fixed Output
0
Unbalanced Variable Output
2
Headphone Output
1/4″ High Drive with Headphone Crossfeed Director (HXD®)
Input Level Match
No
Home Theater PassThru
No
Unbalanced Analog Connector Type
Premium gold-plated solid brass
Service Port
0
Network Connection
0
CONTROL
Tone Controls
Bass and Treble
Tone Bypass and Input Assign
Tone Bypass: Yes
Input Assign: No
RS232 Control Input
No
Power Control Output
2 Main, 2 Switched
Rear Panel Data Port
5
Rear Panel IR Sensor Input
Yes
GENERAL SPECIFICATIONS
Multi-Chassis or Single
Single, two layer
Output Meters
No
Vacuum Tube or Solid State
Vacuum Tube: (5) 12AX7A and (1) 12AT7
Power Consumption (On)
50 Watts
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D)
17.5″ (44.45cm) x 6″ (15.24cm) x 18″ (45.72cm)
Unit Weight
25 lbs (11.3kg)
Shipping Weight
41.4 lbs (18.8kg)
Reviews
There are no reviews yet.