Rotel A10 MKII Stereo Integrated Amplifier

Description

Constructed around a linear power supply featuring a massive Rotel-built toroidal power transformer, the A10MKII delivers an authoritative 50 Watts per channel of Class A/B power into 8 ohms, and even higher power into more challenging loudspeakers.

Power supply innovations and critical circuit layout provide physical and electrical separation to lower the noise floor and increase musical dynamics. The multi-tap transformer delivers isolated power to the low-voltage sensitive circuits and the high current amplifier output transistors further isolating the signal paths reducing unwanted distortion. This sound-first design supports fast transients and delivers an expressive, open musical performance.

All analog sources are welcome, with three line-level RCA inputs, and a Moving Magnet compatible Phono stage provided for vinyl lovers. An 1/8” headphone jack with dedicated headphone amplifier circuit is provided on the front panel for private listening sessions. An intuitive front panel layout includes rotary Bass, Treble, and Balance controls making the A10MKII a joy to use up close, while the included IR remote control, and a motorized analog volume controller extend ease of use to the listening seat. User friendly features such as a detachable IEC power cord, two 12V trigger outputs, heavy 5-way speaker binding posts, and auto power off functions ensure compatibility with any installation.

SPECIFICATIONS

POWER OUTPUT
50W/Ch (8Ω)60W/Ch (4Ω)
TOTAL HARMONIC DISTORTION (THD)
<0.03% FREQUENCY RESPONSE
Line Level Inputs: 10Hz – 100kHz, -0.5dB, +0.05dB Phono Input: 20Hz – 20kHz, -0.5dB, +0.3dB
S/N RATIO (IHF “A” Weighted)
Line Level Inputs: 90dB Phono Input: 85dB

INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0.03% DAMPING FACTOR
120

INPUT SENSITIVITY
Line Level Inputs: 120mV
Phono Input (MM): 1.5mV

INPUT IMPEDANCE
Line Level Inputs: 45kΩ
Phono Input (MM): 43kΩ
INPUT OVERLOAD
Line Level Inputs: 4V
Phono Input: 50mV

TONE CONTROLS
±6dB at 100Hz / 10kHz

DIMENSIONS (W × H × D)
430 × 73 × 347mm
17” x 2 7/8” x 13 5/8”
FRONT PANEL HEIGHT
60 mm (2 3/8”) POWER REQUIREMENTS
230V, 50Hz
POWER CONSUMPTION
150W
STANDBY POWER CONSUMPTION
<0.5W NET WEIGHT
6.6 kg, 14.5 lbs