Classe Audio Sigma 2200i Integrated Amplifier

The Sigma 2200i Stereo Integrated Amplifier is designed for music lovers and AV enthusiasts who want high performance control and amplification from a diverse range audio sources. Its connectivity and processing power accommodate the ever increasing array of music and AV sources, allowing them to be accessed and enjoyed without compromise.


SKU: 2200i Categories: ,

Product Description

The Sigma 2200i is a powerful stereo integrated amplifier with features like USB and Network streaming, HDMI 2.0 switching and bass management to accommodate the evolving needs of a modern hi-fi system.It leverages the technical and performance advantages of our Sigma series separates to punch seriously aboveits weight class. As an integrated amplifier, the 2200i combines preamp and power amp functions in a single chassis. What’s special is its direct digital connection between the preamp section and the amplifier, which eliminates losses by removing digital-to-analog and analog-to-digital conversions from the signal path.

The preamp section of the 2200i features connectivity and circuit blocks found in the Delta series CP-800 and Sigma SSP. Inputs include fully balanced (XLR) and single-ended (RCA) analog with optional MM/MC phono, digital coax,optical, USB host and device, Ethernet for streaming and IP control and HDMI switching. Techniques like asynchronous synchronization and master clock mode allow us to manage the digital clocks for low jitter and high signal integrity. Analog sources are converted at 24/96 to preserve their original bandwidth and dynamic range.

Unlike outboard DACs and preamp/processors that must output analog signals for volume control and amplification, the 2200i leverages the true digital architecture of our proprietary Classé switching amplifier design, connecting the output of the preamp DSP directly to the DSP input of the amplifier. There aren’t any DACs or ADCs nor is there any unnecessary analog circuitry between. The signal path is as short and direct as possible; signals remain digital all the way to the amplifier output filters.

Power is supplied by Classé’s proprietary switch mode power supply with power factor correction. With over 1,000W available, the 2200i coasts through passages that would bring lesser amplifiers to their knees. In addition to supplying clean, rock-steady voltage to the circuitry, this supply pulls power cleanly and efficiently from the wall. And even if you don’t worry about power consumption, you will benefit from the performance and reliability achieved from the comparatively cool-running circuitry contained in the 2200i’s modestly sized chassis.
A front panel touchscreen and both Android and Apple apps provide sophisticated yet intuitive control. DLNA and AirPlay streaming are supported over the Network connection and AV switching with HDMI 2.0 and HDCP 2.2 allows convenient support of set top boxes, games and disc players. Whatever you want to listen to, you can be sure that the 2200i will stand ready to deploy its arsenal of resources, remain faithful to the music and reliably deliver many years of listening pleasure.


USB audio: up to 24-bit/192 kHz
USB (Host): charging capability 2.0 Amps
AirPlay supported formats: AAC (8 to 320 Kbps),
Protected AAC (from iTunes Store),
HE-AAC, MP3 (8 to 320 Kbps),
MP3 VBR, Audible (formats 2, 3, 4,
Audible Enhanced Audio, AAX, and
AAX+), Apple Lossless, AIFF, and WAV
DLNA supported formats: Apple lossless (ALAC), mp3, flac,
wav, Ogg Vorbis, WMA, AAC
Frequency response: 10Hz – 20kHz, -1dB into 4Ω
Output Power: 2 x 200W rms into 8Ω
2 x 400W rms into 4Ω
Harmonic distortion (THD+noise): 0.018% @ 1kHz Both channels
driven to 1/8th power into 4Ω
Maximum input level (single-ended): 2 Vrms
Maximum input level (balanced): 4 Vrms
Maximum output level: 113V peak to peak, 40Vrms
Gain Range: -93 dB to +14 dB
Input impedance (single-ended): 50 kΩ
Input impedance (balanced): 100 kΩ
Signal-to-noise ratio: 97 dB
(re. full-scale input, unweighted)
Standby power consumption: (Wake-on-Network enabled) < 3 W (Wake-on-Network disabled) < 0.5 W Rated power consumption: 185W
Mains voltage: 90-264 V, 50/60 Hz
Overall dimensions Width: 17.00″ (432mm)
Depth (excluding connectors): 14.57″ (370mm)
Height: 5.50″(140mm)
Net weight: 26.7 lb (12.11 kg)
Shipping weight: 34.3 lbs (15.57 kg)


There are no reviews yet.

Be the first to review “Classe Audio Sigma 2200i Integrated Amplifier”